Home Articles List Article Information
JES. Journal of Engineering Sciences
Journal Archive
Volume Volume 53 (2025)
Volume Volume 52 (2024)
Volume Volume 51 (2023)
Volume Volume 50 (2022)
Volume Volume 49 (2021)
Volume Volume 48 (2020)
Volume Volume 47 (2019)
Volume Volume 46 (2018)
Volume Volume 45 (2017)
Volume Volume 44 (2016)
Volume Volume 43 (2015)
Volume Volume 42 (2014)
Volume Volume 41 (2013)
Volume Volume 40 (2012)
Volume Volume 39 (2011)
Volume Volume 38 (2010)
Volume Volume 37 (2009)
Volume Volume 36 (2008)
Volume Volume 35 (2007)
Volume Volume 34 (2006)
El-sayed Gomaa, M., Galal Gomaa, A., Ibrahim Eid, E. (2008). COOLING CHARACTERISTICS OF PARTIALLY HOLLOW FINNED PLATE EXPOSED TO JET IMPINGEMENT. JES. Journal of Engineering Sciences, 36(No 4), 841-862. doi: 10.21608/jesaun.2008.117288
Mohamed El-sayed Gomaa; Abd Alla Galal Gomaa; El-Desuki Ibrahim Eid. "COOLING CHARACTERISTICS OF PARTIALLY HOLLOW FINNED PLATE EXPOSED TO JET IMPINGEMENT". JES. Journal of Engineering Sciences, 36, No 4, 2008, 841-862. doi: 10.21608/jesaun.2008.117288
El-sayed Gomaa, M., Galal Gomaa, A., Ibrahim Eid, E. (2008). 'COOLING CHARACTERISTICS OF PARTIALLY HOLLOW FINNED PLATE EXPOSED TO JET IMPINGEMENT', JES. Journal of Engineering Sciences, 36(No 4), pp. 841-862. doi: 10.21608/jesaun.2008.117288
El-sayed Gomaa, M., Galal Gomaa, A., Ibrahim Eid, E. COOLING CHARACTERISTICS OF PARTIALLY HOLLOW FINNED PLATE EXPOSED TO JET IMPINGEMENT. JES. Journal of Engineering Sciences, 2008; 36(No 4): 841-862. doi: 10.21608/jesaun.2008.117288

COOLING CHARACTERISTICS OF PARTIALLY HOLLOW FINNED PLATE EXPOSED TO JET IMPINGEMENT

Article 6, Volume 36, No 4, July and August 2008, Page 841-862  XML PDF (850.12 K)
Document Type: Research Paper
DOI: 10.21608/jesaun.2008.117288
View on SCiNiTO View on SCiNiTO
Authors
Mohamed El-sayed Gomaa1; Abd Alla Galal Gomaa2; El-Desuki Ibrahim Eid3
1Specialized Studies Academy, Workers University, Technology Dept., Ismailia, EGYPT.
2Refr. and A/C Dept., The Faculty of Industrial Education, Helwan University, Cairo, EGYPT
3Mech. Dept., the Faculty of Industrial Education, Suez Canal University, Suez, EGYPT.
Abstract
In the present work, experimental and numerical investigations have been performed to determine the enhancement of cooling characteristics of partially hollow finned plate due to its exposure to a jet impingement. Six test specimens were designed and manufactured with a particular reference of the heat sink of a PC processor as a test specimen. The hollow shapes were cut in the central zone of the specimens by an adequate cut to form a cylindrical hole or frustum-conical holes of different vertex angles. The effects of Reynolds number, angle of attack and nozzle-to-surface distance on the enhancement of cooling characteristics have been highlighted. Empirical correlations for Nusselt number at the stagnation zone of each hollow shape were exhibited. A three-dimensional numerical simulation using the CFD FLUENT-6.2- code was applied to the case study. The validated CFD model highlights the flow characteristics through the specimens. The results show that the partially hollow finned plate has the potential to deliver a remarkably higher enhancement in the thermal performance if it is compared with those traditional ones.
Keywords
Jet impingement; Heat sink; Hollow shapes; Thermal cooling; Enhancement
Main Subjects
Mechanical, Power, Production, Design and Mechatronics Engineering.
Statistics
Article View: 109
PDF Download: 345