Home Articles List Article Information
JES. Journal of Engineering Sciences
Journal Archive
Volume Volume 53 (2025)
Volume Volume 52 (2024)
Volume Volume 51 (2023)
Volume Volume 50 (2022)
Volume Volume 49 (2021)
Volume Volume 48 (2020)
Volume Volume 47 (2019)
Volume Volume 46 (2018)
Volume Volume 45 (2017)
Volume Volume 44 (2016)
Volume Volume 43 (2015)
Volume Volume 42 (2014)
Volume Volume 41 (2013)
Volume Volume 40 (2012)
Volume Volume 39 (2011)
Volume Volume 38 (2010)
Volume Volume 37 (2009)
Volume Volume 36 (2008)
Volume Volume 35 (2007)
Volume Volume 34 (2006)
A.Abdelaal, O., A. Khalil, A., M.Nasr, A. (2009). CHARACTERISTICS OF OIL-LUBRICATED PARTIALLY HERRINGBONE GROOVED JOURNAL BEARING. JES. Journal of Engineering Sciences, 37(No 4), 925-942. doi: 10.21608/jesaun.2009.127840
O. A.Abdelaal; A. A. Khalil; A. M.Nasr. "CHARACTERISTICS OF OIL-LUBRICATED PARTIALLY HERRINGBONE GROOVED JOURNAL BEARING". JES. Journal of Engineering Sciences, 37, No 4, 2009, 925-942. doi: 10.21608/jesaun.2009.127840
A.Abdelaal, O., A. Khalil, A., M.Nasr, A. (2009). 'CHARACTERISTICS OF OIL-LUBRICATED PARTIALLY HERRINGBONE GROOVED JOURNAL BEARING', JES. Journal of Engineering Sciences, 37(No 4), pp. 925-942. doi: 10.21608/jesaun.2009.127840
A.Abdelaal, O., A. Khalil, A., M.Nasr, A. CHARACTERISTICS OF OIL-LUBRICATED PARTIALLY HERRINGBONE GROOVED JOURNAL BEARING. JES. Journal of Engineering Sciences, 2009; 37(No 4): 925-942. doi: 10.21608/jesaun.2009.127840

CHARACTERISTICS OF OIL-LUBRICATED PARTIALLY HERRINGBONE GROOVED JOURNAL BEARING

Article 12, Volume 37, No 4, July and August 2009, Page 925-942  XML PDF (510.95 K)
Document Type: Research Paper
DOI: 10.21608/jesaun.2009.127840
View on SCiNiTO View on SCiNiTO
Authors
O. A.Abdelaal1; A. A. Khalil2; A. M.Nasr2
1Post graduate student
2Professor, Mechanical Engineering Department, Faculty of Engineering, Assiut University, 71516 Assiut
Abstract
An experimental investigation of the performance of oil-lubricated partially herringbone- grooved journal bearing (HGJBs) which have a beveled-step groove profile have been carried out. The bearing groove parameters (groove angle α, groove width ratio β , groove depth ratio Γ ) have been optimized for a wide range of bearing operating conditions in search of the best stability characteristics. Hydrodynamic lubrication unit with some accompanying apparatuses are used to measure the pressure distribution, attitude angle, Eccentricity, contact and friction torque. The optimized values are (α = 26.78º , β =0.55, Γ =2.2). The test results are compared to experimental results for the completely grooved bearing which have the same beveled-step groove profile [1] ,and rectangular groove profile . In comparison of the previous work the introduced grooved configurations showed high radial stiffness and load capacity, low friction torque and better stability characteristics.
Keywords
Hydrodynamic lubrication; herringbone grooved; partial grooving; load carrying capacity; pressure distribution; stiffness; groove profile
Main Subjects
Mechanical, Power, Production, Design and Mechatronics Engineering.
Statistics
Article View: 146
PDF Download: 638